BlazeFrame® Cost Savings Calculator

Calculate estimated cost savings with BlazeFrame®.


Type of Wall Criteria

Traditional Fluted Deck – Stuffed & Sprayed

Top track – material & installation

$

ft

$

$0.00

Spray proofing – material & installation

in

in

$

42 in³
$0.15
$6.30

ft

$

$0.00

Deck plugs

$

$

in

$1.23

Total installation cost

$7.53
$8.23
$3.15
$11.38

BlazeFrame® – Fire Stop Deflection Track

Material

$

Installation

ft

$

$0.00

Deck plugs

$

in

$1.00

ft

$

$0.00

Total installation cost

$6.00
0

Estimated Savings with BlazeFrame®

Total installed cost of traditional fluted deck - with additional cost for rework

$11.38

Total assembly cost per foot of BlazeFrame

$6.00

Estimated savings per lineal foot

$5.38

Top Track cost per foot

Average cost of deep leg deflection track (no slots) - varies per market. Contractor must enter respective market / product pricing.

Hourly Labor Rate

Productivity and labor rates vary per contractor / per market.

Bucket Cost (5 gal)

Costs vary per market / per application - fields modified at the users discretion.

Preformed Plug (36 in)

Standard (not oversized) mineral wool insulation cost per plug. Costs vary per market - fields may be modified at the users discretion.

Spray rework

Estimation of reapplying caulk over areas where spray application has not fully covered or has been damaged.

BlazeFrame cost per foot

DL2 (deep leg + tape both sides) - 3-5/8" standard contractor pricing. Prices vary depending on width / BlazeFrame component / Tape requirements, etc. Contractor to enter respective market pricing for the component they require.

Oversized Plug (36 in)

Oversized Mineral Wool Insulation cost per plug (industry average) may vary per market.

Preformed Strip (36 in)

Costs, sizes, and thickness required vary per market and deflection - fields may be modified at the users discretion.

Spray Width

Width of band sprayed covering flutes and required overlap onto deck and wall sheathing.

Applied Thickness

Check on manufacturer requirements for applied thickness based on hourly rating of joint.